Manual Overview
LOGIQ e – Basic Service Manual 1-3
5461614-100 English Rev. 6
Manual Overview
This manual provides installation and service information for the
LOGIQ e Ultrasound system and docking cart. It is divided in
twelve chapters as shown below.
Contents in This Section
• ‘Contents in this service manual’ on page 1-3
• ‘Typical users of the Basic Service Manual’ on page 1-4
• ‘LOGIQ e models covered by this manual’ on page 1-5
• ‘General Caution’ on page 1-6
Contents in this service manual
The manual is divided into twelve chapters.
In the beginning of the manual, before chapter 1, you will find
the Revision overview, the Important precautions including
Translation policy, Damage in transportation, Certified electrical
contractor statement, Omission & errors, Service safety
considerations and Legal notes, and the Table of Contents
(TOC).
Table 1-1: Contents in this manual
Chapter
number
Chapter title Description
1.
‘Introduction’ Contains a content summary and warnings.
2.
‘Site Preparations’ Contains pre-setup requirements for the
LOGIQ e and Docking Cart.
3.
‘System Setup’ Contains setup procedure with procedure
checklist for the system.
4.
‘General Procedures
and Functional
Checks’
Contains functional checks for the system that
must be performed as part of the installation, or
as required during servicing and periodic
maintenance.
To Next Page
Loading...
Need help?
General
