Hill-Rom CareAssist P1170 User Manual

2.12 Steering Malfunction
Chapter 2: Troubleshooting Procedures
CareAssist® and CareAssist® ES Bed Service Manual (MAN330 REV 4) Page 2 - 29
2
2.12 Steering Malfunction
1. Set the brake/steer bar to the brake position. Check that the screws or
supports are not damaged, loose or missing from the caster attachments.
All the supports and screws are secure and not damaged.
Yes No
↓→Replace the missing parts, and then go to “Function Checks” on
page 2-5.
2. Check the steering function. Set the brake/steer bar to the steer position,
push the bed lengthways, and check that the foot left caster locks in the
lengthways direction of the bed.
The caster locks in the lengthways direction.
Yes No
↓→Replace the caster (refer to procedure 4.13 on page 4-44). If this
solves the problem perform the “Final Actions” on page 2-12,
otherwise contact Hill-Rom technical support.
3. This solves the problem.
Yes No
↓→Contact Hill-Rom technical support.
4. Go to “Final Actions” on page 2-12.

Hill-Rom CareAssist P1170 Specifications

General

Brand	Hill-Rom
Model	CareAssist P1170
Category	Medical Equipment
Language	English