HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The 40-port 100/1000Base-SFP FPIC provides the following functions:
Provides GE optical interfaces through the GE optical module
Provides FE optical interfaces through the FE optical module
Provides 1000M electrical interfaces through the electrical module
Supports intermixing of all modules
Figure 6-200 Appearance of the 40-port 100/1000Base-SFP FPIC
Panel
Figure 6-201 shows the panel appearance of the 40-port 100/1000Base-SFP FPIC. Table
6-570 describes the indicators on the panel.
Figure 6-201 Panel appearance of the 40-port 100/1000Base-SFP FPIC
Table 6-570 Indicators on the panel of the 40-port 100/1000Base-SFP FPIC
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state.
If the indicator blinks twice every 1s (2 Hz), the FPIC is in the alarm
state.
LINK/ACT
indicator(green)
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
Interface Attributes
Table 6-571 lists the interface attributes of the 40-port 100/1000Base-SFP FPIC.
To Next Page
Loading...
Need help?
General
