IDS X-Series Training v2.7
X-Series aXess
X-Series aXess user settings allow you to add/delete/edit access tags and view aXess transactions.
Option 32 – Adding Access Tags by Typing a Tag Number
Allows the adding of access tags to the system or the editing of existing tags. The procedure to add a tag
is to enter the tags number, allocate it to a user code and any of the eight doors the system is monitoring.
Example:
Option 33 – Adding Access Tags by Swiping a Tag
Allows the adding of access tags to the system or the editing of existing tags. The procedure to add a tag
is to swipe the tag, allocate it to a user code and any of the eight doors the system is monitoring.
Example:
Option 34 – Delete Access Tags by Typing a Tag Number
Allows the user to remove a tag from the reader by typing in the tag number.
Example:
Press and hold the [*] key for 3 seconds
Enter the master code, followed by the [*] key
Enter the value to add a tag, followed by the [*] key
Enter the tag number, followed by the [*] key
Select the doors by entering door number followed by [*] key
When finished selecting doors press the [*] key
Enter user code, followed by [*] (if no user code just press [*])
When complete press the [#] key
Press and hold the [*] key for 3 seconds
Enter the master code, followed by the [*] key
Enter the value to add a tag, followed by the [*] key
Enter the door number you will use to swipe the tag, followed by the[*] key
Swipe the tag, followed by the [*] key
Select/Deselect the doors by entering door number followed by [*] key
When finished selecting doors press the [*] key
Enter user code, followed by [*] (if no user code just press [*])
When complete press the [#] key
Press and hold the [*] key for 3 seconds
Enter the master code, followed by the [*] key
Enter the value to delete a tag, followed by the [*] key
Enter the card number, followed by the [*] key
When complete press the [#] key
To Next Page
Loading...
Need help?
General
