INVT IPE300 Series User Manual

IPE300 series engineering VFD Maintenance
-271-
8.4.2 Electrolytic capacitor replacement
 Read chapter 1 “Safety precautions” carefully and follow the instructions to
perform operations. Ignoring these safety precautions may lead to physical injury
or death, or device damage.
The electrolytic capacitor of a VFD must be replaced if it has been used for more than 35,000 hours.
For details about the replacement, contact the local INVT office.
8.5 Power cable
 Read chapter 1 “Safety precautions” carefully and follow the instructions to
perform operations. Ignoring these safety precautions may lead to physical injury
or death, or device damage.
1. Stop the VFD and disconnect the power supply. and wait for a time no shorter than the waiting
time designated on the VFD.
2. Check the connection of the power cables. Ensure that they are firmly connected.
3. Power on the VFD.

INVT IPE300 Series Specifications

General

Brand	INVT
Model	IPE300 Series
Category	DC Drives
Language	English