EasyManuals Logo
Home>Keithley>Measuring Instruments>SourceMeter 2410

Keithley SourceMeter 2410 User Manual

Keithley SourceMeter 2410
594 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
1-6 Getting Started 2400 Series SourceMeter
®
User’s Manual
Model 2420:
Source voltage from 5µV to 63V; measure voltage from 1µV to 63.3V.
Source current from 500pA to 3.15A; measure current from 100pA to 3.165A.
Measure resistance from 10µ (<10µ in manual ohms) to 21.1M.
Maximum source power is 66W.
Models 2425 and 2430:
Source DC or pulse voltage from 5µV to 105V; measure voltage from 1µV to
105.5V.
Source DC current from 500pA to 3.15A; measure DC current from 100pA to
3.165A.
Source pulse current from 500pA to 10.5A; measure pulse current from 100pA to
10.55A. (Model 2430 only.)
Measure resistance from 10µ (<10µ in manual ohms) to 21.1M.
Maximum DC source power is 110W.
Maximum pulse source power is 1.1kW. (Model 2430 only.)
Model 2440:
Source voltage from 5µV to 42V; measure voltage from 1µV to 42V.
Source current from 500pA to 5.25A; measure current from 100pA to 5.25A.
Measure resistance from 10µ (<10µ in manual ohms) to 21.1M.
Maximum source power is 66W.
NOTES The Models 2400, 2410, 2420, 2425, 2430, and 2440 are Y2K compliant.
Models with a “-C” suffix have the Contact Check option. See Appendix F.
Some additional capabilities of the SourceMeter include:
Concurrent measurements of all three functions over the remote interface.
Source-measure sweep capabilities (linear and logarithmic staircase sweeps,
source sweep list of up to 2500 points, memory sweep of up to 100 instrument set-
ups).
6-wire measurement with programmable I-source or V-source with V or I clamp.
4-quadrant source and sink operation.
Up to 12 stages of limit testing with a built-in comparator for pass/fail testing.
Digital I/O for stand-alone binning operations or interface to component handler.
Programming language and remote interfaces — The SourceMeter uses the SCPI
programming language and two remote interface ports (IEEE-488/GPIB and
RS-232C).
•Trigger-Link interface to Keithley Series 7000 switching hardware.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Other manuals for Keithley SourceMeter 2410

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keithley SourceMeter 2410 and is the answer not in the manual?

Keithley SourceMeter 2410 Specifications

General IconGeneral
BrandKeithley
ModelSourceMeter 2410
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals