Kubota GZD15 User Manual

GZD15, WSM ENGINE
1-S50
[3] LUBRICATING SYSTEM
(1) Checking
Engine Oil Pressure
1. Remove the engine oil pressure switch, and set an oil
pressure tester (Code No.: 07916-32032).
2. Start the engine. After warming up, measure the oil pressure
of both idling and rated speeds.
3. If the oil pressure is less than the allowable limit, check the
following.
A Engine oil insufficient.
A Oil pump defective
A Oil strainer clogged
A Oil filter cartridge clogged
A Oil gallery clogged
A Excessive oil clearance
A Foreign matter in the relief valve
(When reassembling)
A After checking the engine oil pressure, tighten the engine oil
pressure switch to the specified torque.
Engine oil pressure
At idle
speed
Factory
spec.
More than 49 kPa
0.5
7 psi
At rated
speed
Factory
spec.
196 to 441 kPa
2.0 to 4.5
28 to 64 psi
Allowable
limit
147 kPa
1.5
21 psi
0000000914E
KiSC issued 04, 2006 A

Kubota GZD15 Specifications

General

Transmission	Hydrostatic
Drive Type	2WD
Engine Type	Diesel
Engine Power	15 HP
Weight	640 kg