GZD15, WSM MOWER
6-S4
4. CHECKING, DISASSEMBLING AND ASSEMBLING
[1] CHECKING AND ADJUSTING
Adjusting Anti-scalp Rollers
A he flattest cut can be achieved by having the anti-scalp
rollers adjusted off the ground.
Check anti-scalp roller adjustments each time the mower
deck cutting height is changed.
It is recommended that all the anti-scalp rollers be kept off
the ground to minimize scuffing.
1. Check the machine wheel pressure.
Inflate wheels to the correct pressure. (See table below.)
2. Start the engine.
3. Raise up the mower deck to the transport position.
(Also the top end of the lift.)
4. Turn the cutting height control dial to adjust height.
5. Lower the mower deck.
Tyre Size Inflation Pressure
Front Wheel (15 x 6.0-6, 4PR Rib) 270 kPa, 2.1 , 30 psi
Rear Wheel (20 x 10.00-8, 4PR Turf) 140 kPa, 1.4 , 20 psi
0000001554E
To Next Page
Loading...
Need help?
General
