EasyManuals Logo
Home>Manitou>Boom Lifts>200 ATJ

Manitou 200 ATJ User Manual

Manitou 200 ATJ
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
1 - 7
D - MODIFYING THE PLATFORM
INSTRUCTIONS TO SITE MANAGER: C-MODIFYING THE PLATFORM.
E - DIESEL PLATFORM AXLES
NON-OSCILLATING AXLE (ACCORDING TO MODEL)
IMPORTANT
The chassis is rigid, so the platform can be load bearing on only three wheels.
OSCILLATING AXLE (ACCORDING TO MODEL)
IMPORTANT
An oscillating axle enables the platform to have a ground reach on four wheels when in transport position.
When moving in the working position over uneven terrain, the oscillating axle is locked (the frame is stiff) so the platform may be bearing on only three wheels.
F - SAFETY DEVICES
- This machine is fitted with special safety devices that are able to limit its operation as circumstances require
(2-DESCRIPTION):
• Overload in the basket.
• Tilting of the platform beyond the authorised limits.
• Blocking of the oscillating axle (according to model).
• Slack or broken telescope cable (according to model).
OPERATING INSTRUCTIONS
A - BEFORE STARTING-UP THE PLATFORM
- Perform the daily maintenance operations (3-MAINTENANCE).
B - DRIVERS OPERATING INSTRUCTIONS
- Whatever their experience, operators are advised to familiarise themselves with the position and operation of the control
panels before putting the platform into operation.
- The platforms arms must be fully lowered (down position for scissor platforms) before getting into or out of the basket;
always get in and out facing the inside of the basket.
- If the platform is equipped with steps, the basket must be positioned vertically with these before getting in or out.
- Always use both hands and one foot or both feet and one hand to get in and out.
- Ensure that the guard rail and/or the access gate (according to model) is fully in the locked position before operating
the platform from the basket.
- MANITOU recommends a safety harness in the operators size be provided when the platform is in use (for the harness
attachment in the basket,
2-DESCRIPTION).
- Safety helmets must be worn.
- Wear suitable clothing for driving the platform; do not wear baggy clothes.
- Never operate the platform when hands or feet are wet or soiled with greasy substances.
- Make sure you have the appropriate protective equipment for the job to be done.
- Prolonged exposure to high noise levels may cause hearing problems. It is recommended to wear ear muffs to protect
against excessive noise.
- Remain alert at all times when using the platform. Do not listen to the radio or music using headphones or earphones.
- The operator must always be in the normal operators position. It is prohibited to have arms or legs, or generally any part
of the body, protruding from the basket.
- The control units must never in any event be used for any other than their intended purposes (e.g. getting in or out
ofthe basket, portmanteau, etc.).
- The platform must not be fitted with unauthorised attachments that increase the units wind load.
- Do not use a ladder or any improvised constructions in the basket to reach greater heights.
- Do not climb on the basket frame to reach greater heights.
547399 (01/03/2019)
200 ATJ
www.duma-rent.com

Table of Contents

Other manuals for Manitou 200 ATJ

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou 200 ATJ and is the answer not in the manual?

Manitou 200 ATJ Specifications

General IconGeneral
BrandManitou
Model200 ATJ
CategoryBoom Lifts
LanguageEnglish

Related product manuals