1 - 12
PLATFORM MAINTENANCE INSTRUCTIONS
GENERAL INSTRUCTIONS
- Read the operator’s manual carefully.
- Wear clothes suitable for the maintenance of the lift truck, avoid wearing jewellery and loose clothes. Tie and protect
your hair, if necessary.
- DIESEL PLATFORM:
• Make sure the area is adequately ventilated before starting up the platform.
• Stop the engine before conducting any work on the platform, switch off the platform and turn the battery cut-off
tothe OFF position (according to model).
- ELECTRIC PLATFORM: Switch off the platform before carrying out any work on the platform and turn the battery cut-off
to the OFF position.
- Carry out all repairs immediately, even if the repairs concerned are minor.
- Repair all leaks immediately, even if the leak concerned is minor.
- Ensure that process materials and of spare parts are disposed in all safely and in an ecological manner.
- Be careful of the risk of burning and splashing (exhaust, radiator, engine, etc.).
MAINTENANCE
- Perform the periodic service (3-MAINTENANCE) to keep your platform in good working condition. Failure to perform
the periodic service may void the contractual guarantee.
MAINTENANCE LOGBOOK
- The maintenance operations carried out in accordance with the recommendations given in chapter 3-MAINTENANCE
and the other inspection, servicing or repair operations or modifications performed on platform shall be recorded
inamaintenance logbook. The entry for each operation shall include details of the date of the works, the names of the
individuals or companies having performed them, the type of operation and its frequency, if applicable. The part numbers
of any platform items replaced shall also be indicated.
LUBRICANT AND FUEL LEVELS
- Use the recommended lubricants (never use contaminated lubricants).
DIESEL PLATFORM
- Do not fill the fuel tank when the engine is running.
- Only fill up the fuel tank in areas specified for this purpose.
- Do not smoke or approach the platform with a flame, when the fuel tank is open or is being filled.
BATTERY ELECTROLYTE LEVEL (ELECTRIC PLATFORM)
- Check the electrolyte level of the battery or batteries.
IMPORTANT
Ensure you take all the safety precautions when performing this operation (
3-MAINTENANCE).
HYDRAULICS
- Any work on the hydraulic circuit is forbidden except for the operations described in chapter 3-MAINTENANCE.
- Do not attempt to loosen connections, hoses or any hydraulic component with the circuit under pressure.
IMPORTANT
COUNTERBALANCE VALVE: It is dangerous to change the setting or remove the counterbalance valves or safety valves which may be fitted to your platform cylinders.
These operations must only be performed by approved personnel (consult your dealer).
HYDRAULIC ACCUMULATOR (according to model): dismantling hydraulic accumulators and their pipes that may be fitted on your platform is dangerous.
These operations must only be performed by approved personnel (consult your dealer).
To Next Page
Loading...
Need help?
General
