2 - 67
RESCUE PROCEDURE
IMPORTANT
This procedure should be read and fully understood by the operator and any other persons likely to be involved with working on the platform in the event of a breakdown
or a person getting trapped in the basket.
SHOULD THE USER FEEL ILL - PRIORITY CONTROLS
Illustrations:
#1
= first version,
#2
= second version.
If the operator in the basket should fall ill or find himself incapable of manoeuvring,
the person present on the ground can take over the platform controls from the ground
based control panel.
If the engine has been started:
- Press and hold the switch
1
to the right or (depending on version).
- Lower the basket using the appropriate control keys.
- Release the keys or the switch to stop activated controls.
If the engine has not been started and the emergency stop button in the basket is in
the ON position (interface is turned on):
- Switch on the engine.
- Press and hold the switch
1
to the right or (depending on version).
- Lower the basket using the appropriate control keys.
- Release the keys or the switch to stop activated controls.
From machine no. 949267
If the engine has not been started and the emergency stop button in the basket is in
the OFF position (interface screen is off):
- Press and hold the switch
1
to the right or (depending on version).
- Wait for the preheat cycle to finish and start up the engine.
- Lower the basket using the appropriate control keys.
- Release the keys or the switch to stop activated controls.
IF THERE IS A BREAKDOWN - EMERGENCY CONTROLS FROM THE BASKET
Illustrations:
#1
= first version,
#2
= second version.
IMPORTANT
The backup pump should be activated for a maximum of 4 minutes, then wait 10 minutes before reactivating the pump
for a new 4 minute cycle.
Do not try to use the controls simultaneously.
When a fault occurs in the engine, the platform has a backup pump, which can be
activated from the basket control panel, allowing a return to the ground.
- Press and hold down the backup pump button
1
to activate the backup pump.
- Use the controls on the control panel in the basket.
- Release the switches and/or control handles to stop the control that has been
activated.
- Release backup pump button.
NOTE: It is not possible to drive/steer the platform.
1
#1
1
#2
1
#2
1
#1
To Next Page
Loading...
Need help?
General
