Crane operation
11.2 Operation of the rated capacity limiter
Operating Manual GMK6300L 3 112 xxx en 11 - 29
xx.xx.xxxx
Entering the
reeving
Entering the reeving does not have an effect on any other component that
has already been entered.
• Press button (5) repeatedly until the symbol
for the hoist with which you want to lift the
load has turned green.
• Press button (1) or (2) repeatedly until dis-
play (6) shows the number of currently
reeved rope lines.
Accepting the
rigging mode
Prior to crane operation, you must confirm and accept the newly entered
rigging mode.
Confirming the rigging mode
• Press the button (2) once.
– If the rigging mode is permissible, lamp (1) will go out. The
Rigging
mode monitoring
submenu will open and you can accept the rigging
mode.
– If the rigging mode is not permissible, lamp (1) will light up. Press
button (2) once to display the error codes;
à p. 14 - 31.
s
3 Symbol for main hoist
4 Symbol for auxiliary hoist
To Next Page
Loading...
Need help?
General
