Crane operation
11.2 Operation of the rated capacity limiter
11 - 36 3 112 xxx en Operating Manual GMK6300L
xx.xx.xxxx
The currently raised load
The display (1) shows the sum of the payload + lifting gear + hook block.
The maximum load
Display (2) shows the maximum load that can be lifted in the current rigging
mode with the current working radius.
If the maximum load is reduced due to the reeving entered, symbol (1) will
be red.
In this case, you can have the maximum possible load displayed briefly.
• Press the button (3) once.
Display (2) shows the maximum possible load that can be lifted with suf-
ficient reeving according to the
Lifting capacity table.
The degree of utilisation
The degree of utilisation shows the weight of the current load as a percent-
age of the maximum possible load. Display (1) shows the percentage value.
Display (2) shows the ranges in different colours:
Blue: 0 – 90%
Yellow: Approx. 90 – 100%
Red: greater than 100%
To Next Page
Loading...
Need help?
General
