Manitowoc Grove TMS9000-2 Series User Manual

OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-92 Published 02-21-2019, Control # 611-05
Engine
Side panel
Starting the engine – from the superstructure cab.
Ignition lock
To start the engine:
1. Turn the ignition key ON. Then,
2. Press and hold the top of the increment/decrement
switch (Figure 3-104).
To turn the engine OFF:
1. Turn the ignition key OFF, OR
2. Press and hold the bottom of the increment/decrement
switch.
These do not depend on the carrier ignition key. They will
turn the engine on or off with the carrier key in either position.
Turning the carrier key from ON to OFF will stop the engine
no matter what position the superstructure key is in.
Set idling speed
With the engine off:
With the engine running:
Economy mode menu
To open: Select symbol (1, (Figure 3-105)) and confirm
Select symbol and confirm for (Figure 3-106):
Seat contact switch and dead man's
switches
The seat contact switch and the dead man's switch are
safety interlocks for enabling crane functions.
Enabling crane functions
• Activate the rocker switch of the desired crane
function(s)
0
Ignition off, key off, key can be removed
(Figure 3-103)
1
Ignition on and power supply on for:
instrument lighting, CCS, engine control
system, RCL
Press up once
and release
(Figure 3-104):
Engine starts, idling speed is normal
Press up and
hold:
To increase the idling speed
Press down
and hold:
To decrease idling speed, engine shuts
off after approx. 2 seconds after idle is
reached.
FIGURE 3-103
8856-23
1
Switching Economy mode on/off, refer to Economy
Mode, page 3-138
2Set interval 1
3Set interval 2
4 Average consumption
8856-24
FIGURE 3-104
8856-24
FIGURE 3-105
8882-2
1
FIGURE 3-106
8854-83a
1
2
3
4

Manitowoc Grove TMS9000-2 Series Specifications

General

Brand	Manitowoc
Model	Grove TMS9000-2 Series
Category	Construction Equipment
Language	English