SET-UP AND INSTALLATION TMS9000-2 OPERATOR MANUAL
6-42
Published 02-21-2019, Control # 611-05
Hoist maintenance platform
The turntable is equipped with extendable/retractable
handrails.
Always fold out the railings when you are working on the
hoists. Always fold in the railings before driving.
(A) – Folding out
• Fold the handrail (1, Figure 6-71) upwards until the pins
(2) latch into place.
(B) – Folding in
• Open the locking pins (2).
• Fold the handrail (1) in until the pins (2) latch into place.
Slinging points for personal protective
equipment
The approved slinging points for personal safety equipment
are marked with special labels (2, Figure 6-72).
On the main boom
For rigging work on the main boom, always secure yourself
using the slinging points (1) and your personal safety
harness.
DANGER
Fall Hazard!
Ensure the railings are erected and secured before
entering the hoist maintenance platform. Failure to do so
could result in death or serious injury.
CAUTION
Machine Damage!
Fold in the railings before driving. When the railings are
unfolded, the overall height specified for on-road driving is
exceeded.
To Next Page
Loading...
Need help?
General
