OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-114 Published 02-21-2019, Control # 611-05
b. Turn off the remote control by pressing the power
button on the top of the remote control.
c. Set the remote control switch on the carrier control
console to OFF.
d. If you want to keep the engine running:
- First, set the remote control switch on the
carrier control console to OFF.
- Then, turn off the remote control by pressing
the power button on the top of the remote
control. If you fail to perform this step the
remote control will remain ON (not operable)
and its battery will discharge.
Operating Remote Control
Superstructure Horn
Press and hold the horn button on the remote control
to sound the superstructure horn. The superstructure horn
button can also be used to sound the horn.
Emergency Stop
When the E-stop knob (see Figure 3-168) is pushed in:
• The engine stops
• The function being operated stops
• The STOP screen appears.
To restart the engine, the E-stop knob must be pulled out.
To Next Page
Loading...
Need help?
General
