OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-32 Published 02-21-2019, Control # 611-05
SHORT DESCRIPTION OF THE OPERATING
ELEMENTS OF THE CRANE CONTROL
SYSTEM
Definition of direction information
Basic rule
Direction information always depends on whether the carrier
or the superstructure is being operated.
On the carrier
The driver's cab is always at the front, which means that
sitting in the driver’s seat looking forward left is on your left
side, right is on your right side, forward is the front and the
rear is behind you.
On the superstructure
The main boom head is always at the front (Figure 3-17),
which means that:
General rules for buttons and symbols on
the display
The symbols shown as an example are not present on all
crane types. The following rules apply in all menus:
• A menu can only be opened if the relevant symbol has
been selected with the jog dial (1, (Figure 3-18)) or
direction buttons (2).
• A selected menu is marked in color and can be opened
(Figure 3-19).
Symbols can be shown in different colors (Figure 3-20). The
color of the symbol indicates the current switching state of
the relevant power unit.
WARNING
An untrained operator subjects himself and others
to death or serious injury. Do not operate this
crane unless:
• You are trained in the safe operation of this crane.
Grove is not responsible for qualifying personnel.
• You read, understand, and follow the safety and
operating recommendations contained in the crane
manufacturer’s manuals and load charts, your
employer’s work rules, and applicable government
regulations.
• You are sure that all safety signs, guards, and other
safety features are in place and in proper condition.
• The Operator’s Manual and Load Chart are in the
holder provided on crane.
1: front 2: right
3: rear 4: left
1 Grey: e.g. main hoist – off
2 Green: e.g. auxiliary hoist – on
To Next Page
Loading...
Need help?
General
