Manitowoc Grove TMS9000-2 Series User Manual

5-1
TMS9000-2 OPERATOR MANUAL LUBRICATION
5
Published 02-21-2019, Control # 611-05
Grove
SECTION 5
LUBRICATION
SECTION CONTENTS
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Environmental Protection . . . . . . . . . . . . . . . . . . . 5-1
Cummins Oil Registration List. . . . . . . . . . . . . . . . 5-1
Arctic Conditions Below -18° C (0° F). . . . . . . . . . 5-2
Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Standard Lubricants . . . . . . . . . . . . . . . . . . . . . . . 5-3
Cold Weather Lubricants . . . . . . . . . . . . . . . . . . . 5-5
Arctic Lubricants and Conditions . . . . . . . . . . . . . 5-7
Drivetrain Lubrication. . . . . . . . . . . . . . . . . . . . . . . 5-8
Clutch Release Bearing Grease Interval. . . . . . . 5-11
Steering Lubrication . . . . . . . . . . . . . . . . . . . . . . 5-14
Axle Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
Outrigger Lubrication . . . . . . . . . . . . . . . . . . . . . 5-17
Miscellaneous Lubrication . . . . . . . . . . . . . . . . . . 5-18
Turntable & Cab Tilt Lubrication . . . . . . . . . . . . . 5-19
Hoist Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . 5-22
Turntable Central Lubrication . . . . . . . . . . . . . . . 5-23
Boom Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . 5-24
Monthly Lubrication Work . . . . . . . . . . . . . . . . . . 5-27
Carwell® Rust Inhibitor. . . . . . . . . . . . . . . . . . . . . 5-28
Protecting Cranes From Corrosion . . . . . . . . . . . 5-28
Cleaning Procedures . . . . . . . . . . . . . . . . . . . . . . 5-28
Inspection and Repair . . . . . . . . . . . . . . . . . . . . . 5-29
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29
Areas of Application. . . . . . . . . . . . . . . . . . . . . . . 5-29
GENERAL
Following the designated lubrication procedures is important
in ensuring maximum crane lifetime and utilization. The
procedures and lubrication charts in this section include
information on the types of lubricants used, the location of
the lubrication points, the frequency of lubrication, and other
information.
The service intervals specified are for normal operation
where moderate temperature, humidity, and atmospheric
conditions prevail. In areas of extreme conditions, the
service periods and lubrication specifications should be
altered to meet existing conditions. For information on
extreme condition lubrication, contact your local Grove
Cranes distributor or Manitowoc Crane Care.
Environmental Protection
Dispose of waste properly! Improperly disposing of waste
can threaten the environment.
Potentially harmful waste used in Grove cranes includes —
but is not limited to — oil, fuel, grease, coolant, air
conditioning refrigerant, filters, batteries, and cloths which
have come into contact with these environmentally harmful
substances.
Handle and dispose of waste according to local, state, and
federal environmental regulations.
When filling and draining crane components, observe the
following:
• Do not pour waste fluids onto the ground, down any
drain, or into any source of water.
• Always drain waste fluids into leak proof containers that
are clearly marked with what they contain.
• Always fill or add fluids with a funnel or a filling pump.
• Immediately clean up any spills.
Cummins Oil Registration List
Cummins has a program that lists engine oils that it has
tested to meet its engineering specifications. Listing of
recommended oils is on QuickServe® Online. Log on to
quickserve.cummins.com and login with a current username
and password or create a new account by selecting “Create
an Account” under information, choose Limited Owners Plan
and register. Once logged in, click on the “Service” Tab in the
top red bar, “Service Tools” mini-tab and “Oil Registration
Lists” link within the Service Tools list. This will load a list of
the different Cummins Engineering Specification numbers.
CAUTION
Chassis grease lubricants must not be applied with air
pressure devices as this lubricant is used on sealed
fittings.
The multipurpose grease installed during manufacture is
of a lithium base. Use of a non-compatible grease could
result in damage to equipment.

Manitowoc Grove TMS9000-2 Series Specifications

General

Brand	Manitowoc
Model	Grove TMS9000-2 Series
Category	Construction Equipment
Language	English