Mindray DC-8 EXP Service Manual

Care & Maintenance 12-7
Table 12-4 Peripherals Cleaning List
No.
Content
Description
1.
Color and B/W video
printer
First wipe off dust or stain attached to the cover of printer with
soft dry cloth, then clean the inside of printer. Be sure to do the
cleaning maintenance according to the operation manual if is
necessary.
2.
Graph / text printer
First wipe off dust or stain attached to the cover of printer with
soft dry cloth, then clean the inside of printer. Be sure to do the
cleaning maintenance according to the operation manual if is
necessary.
3.
Foot switch
Use soft dry cloth with a little mild soap water to wipe off the
dust or stain attached to the pedals or cable of foot switch.
4.
Bar code scanner
First use soft dry cloth to wipe off dust attached to glass panel
of scanner, then the dust or strain attached to cable and
bracket. Be sure to do the especial cleaning maintenance
according to the operation manual if is necessary.
12.3 Checking
12.3.1 General check
Table 12-5 General check list
No.
Content
Method
1.
Probe
a) Visually check to confirm that there is no crack and expansion
to probe head.
b) Visually check to confirm that there is no deterioration or
desquamation to probe cable.
c) Visually check to confirm that there is no bend, destroyed or
falling off pins to the connector
2.
Power supply
cable and plug
a) Visually check to confirm that there is no wrinkles, crack or
deterioration
b) Manually check to confirm that there is no looseness or rupture.
The connection of plug is reliable and the retaining clamp of
power supply cable is effective.
3.
Circuit breaker
Manually check to confirm that the circuit breaker can be turned on
or off normally.

Mindray DC-8 EXP Specifications

General

Brand	Mindray
Model	DC-8 EXP
Category	Medical Equipment
Language	English