Mindray DC-8 EXP Service Manual

System Installation 3-19
The DICOM Service Setting is used to set properties of DICOM services as Storage, Print,
Worklist, MPPS, Storage Commitment and Query/ Retrieve. The detailed information please refer to
“DICOM” of user manual.
NOTE:
Only if DICOM basic option is configured, Worklist page is available.
3.5.7 Check System Information
In System Information screen, it displays the product configuration, the optional installation status,
software version, hardware & boards, and driver related information. You can check the product
information here.
1. Press <Setup>, and then click [System Info] to open the following screen.
2. On About Detail page, system hardware & board related information can be seen.
3. Confirm the system information is correct, and then export the system information in a file
of .txt format.
NOTE:
1.
Be sure to confirm the system information before and after the software
maintenance.
2.
If necessary, please ask the user to save the current system information.

Mindray DC-8 EXP Specifications

General

Brand	Mindray
Model	DC-8 EXP
Category	Medical Equipment
Language	English