Motorola iDEN Site Controller User Manual

68P80801E30-A 5/1/2002 B-13
Gen 3 Site Controller System Manual Appendix B Parts & Suppliers
Anti-oxidant greases
Any one of the following anti-oxidant greases are recommended for
connections to the positive (+) and negative (-) terminals of the batteries:
■ No-Ox
■ OxGuard
■ Penetrox
Intercabinet cabling
Ethernet and alarm cables connecting to the Junction Panels of each cabinet
are supplied with the system. These cables may not be suitable for every site.
It may be necessary to locally fabricate cables for a custom fit. Information
is provided for both supplied cables and custom cables.
Supplied cables
The cables listed in Table B-6 are supplied with the system. The length of
these cables should be sufficient if the considerations outlined in the
Pre-Installation chapter were followed.
Table B-6 Supplied intercabinet cabling
Description Qty. P/N
120" long, N-type male to N-type male cable 3 0112004B24
108" long, BNC male-to-BNC Male, RG400 cable 2* 0112004Z29
210" long, 8-pin modular plug cable 1* 3084225N42
186" long, PCCH redundancy control cable 1** 3082070X01
phasing harness 1 0182004W04
NOTE: All part numbers are Motorola.
* Per RF Cabinet.
** Per Control Cabinet.

Motorola iDEN Site Controller Specifications

General

Brand	Motorola
Model	iDEN Site Controller
Category	Controller
Language	English