Notifier AFP-3030 Programming Manual

86 AFP-3030 Programming Manual — P/N DOC-01-032:A 26/06/2015
Alter Status Service Mode FAAST Detector
4.7 Service Mode FAAST Detector
An aspiration detector can be placed in Service Mode when maintenance is performed on the
device. When in service mode, the panel will display a SERVICE MODE point fault for the SLC
point(s) associated with the FAAST detector. For maintenance information, refer to the FSA-8000
FAAST Installation and Maintenance Instructions document (I56-3903).
.
Figure 4.18 Service Mode Point Select Screen
Soft Keys
POINT: Press this soft key to select the aspiration detector that will be placed in Service Mode.
NEXT/PREVIOUS POINT: Press to progress to the next or previous point on the loop.
ACCEPT: Press to continue to the second Service Mode screen.
Figure 4.19 Service Mode Screen
SERVICE MODE
POINT SELECT:
N000LyyDzzz
(DETECTOR)
NEXT POINT ACCEPT
PREVIOUS POINT BACK
SYSTEM NORMAL
AUTOMATIC INACTIVE
Detector L01D001
Zone Z001 Z001 ASPIR. (SUP)
VALUES: 000% OF ALARM
TURN ON SERVICE MODE
BACK
NOTE: If the detector selected is not an aspiration detector, the fire panel will display the
message NOT A FAAST DETECTOR.

Notifier AFP-3030 Specifications

General

Brand	Notifier
Model	AFP-3030
Category	Control Panel
Language	English