88 AFP-3030 Programming Manual — P/N DOC-01-032:A 26/06/2015
Alter Status Reset IP Address FAAST Detector
Figure 4.21 Service Mode Screen
Soft Keys
RESET BASELINE: Press this soft key to reset the baseline threshold for the aspiration detector
displayed. The VALUES display will show 000% OF ALARM.
4.9 Reset IP Address FAAST Detector
The IP address of an aspiration detector can be modified using the PipeIQ software. The Reset IP
Address option will reset the IP address for the FAAST detector to its default.
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A TUE JAN 25, 2011
RESET BASELINE:L01D001
AUTOMATIC INACTIVE
Detector L01D001
Zone Z001 Z001 ASPIR. (SUP)
VALUES: 000% OF ALARM
RESET BASELINE
BACK
NOTE: If the detector selected is not an aspiration detector, the fire panel will display the
message NOT A FAAST DETECTOR.
To Next Page
Loading...
Need help?
General
