Need help?Do you have a question about the Panduit smartzone G5 and is the answer not in the manual?
General| Type | Power Distribution Unit (PDU) |
|---|---|
| Input Frequency | 50/60 Hz |
| Form Factor | 0U, 1U, 2U |
| Remote Management | Yes |
| Model | SmartZone G5 |
| Outlet Type | IEC 60320 C13, IEC 60320 C19 |
| Features | Environmental Monitoring |
| Metering | Outlet Level |
| Humidity Range | 5% to 95% non-condensing |
| Phase | Single or Three Phase |
Details the Panduit G5 Intelligent PDU Controller, its IP address, and web interface capabilities.
Instructions for connecting the PDU to a LAN using an Ethernet cable for monitoring and control.
Steps to connect the PDU using a serial port for network setting configuration if network connection fails.
Describes IP addressing after receiving an IP address and how to connect to the PDU's web interface.
Details supported web browsers and the mandatory process of changing the default password upon initial login.
Information on default login credentials and procedures for lost admin credentials.
Overview of the login page and the landing page/dashboard of the web interface.
Explanation of the function of each navigation icon within the web interface.
Details on monitoring individual outlets and environmental sensors via the web interface.
Overview of security sensors and their status within the web interface.
Covers IP configuration, RESTapi, SSH/FTPs, NTP, and Date/Time settings.
Guide to configuring system name, contact, and location details for PDU identification.
Instructions for defining the physical location of the PDU within a rack or cabinet.
Details on naming PDUs within a system and their physical location in the rack.
Procedures for manually setting the PDU's internal clock or linking it to an NTP server.
Steps to configure the PDU to synchronize its time with an NTP server.
Guide to setting up daylight saving time parameters for accurate timekeeping.
Customizing outlet names and defining their power state upon PDU startup.
Procedure for switching individual switched outlets on, off, or power cycling them.
Programming pre-determined on/off delays for outlets to manage power sequencing.
Configuring power and energy thresholds for alert notifications.
Setting thresholds for phase current and voltage to trigger alarms.
Configuring alarms for circuit breakers and device detection thresholds.
Setting alarm thresholds for outlet amperage to monitor and alert on usage.
Configuring the PDU to send email alerts for events via an SMTP server.
Instructions for viewing, downloading, and configuring data logs.
Procedure for logging out of the web interface to prevent unauthorized changes.
Explanation of Administrator and Read-Only privileges and default roles.
Steps for adding, modifying, and deleting user accounts with specified roles.
Guide to configuring the system for RADIUS authentication for secure access.
Steps for configuring the PDU to integrate with LDAP servers for authentication.
Initial configuration steps for SNMP management, including general settings.
Setting up SNMP and SNMP Trap ports for network monitoring.
Procedure for configuring SNMP V1/V2c managers and defining user access.
Steps for configuring SNMP V3 managers, including security levels and algorithms.
Setting up SNMP traps to send event notifications to a third-party manager.
Overview of the PDU's onboard display and network controller panel.
Description of Menu, Standby, and Power Save modes for the controller display.
Explanation of the function of the Menu, Scroll, and Select buttons.
Table detailing the LED states and their corresponding PDU status.
Visual representation of the navigation hierarchy within the controller's menu.
Introduction to the main menu options: Setup, Alarms, Power, and Sensors.
Overview of the Setup menu, including Network, Device, Screen, Language, USB, and Units submenus.
Information on viewing IP addresses (IPv4/IPv6) within the Network submenu.
Details on accessing SKU, Serial, MAC address, and Firmware version.
Options for customizing screen contrast, rotation, and always-on settings.
Procedure for selecting the display language for the PDU.
Instructions for uploading firmware and downloading logs via USB.
Setting the temperature display unit to Celsius or Fahrenheit locally.
Accessing and viewing active alarms for the PDU.
Navigating the Power menu to manage device, phase, breaker, and outlet information.
Details on viewing electrical information at device, phase, breaker, and outlet levels.
Displaying sensor data for temperature, humidity, door switch, and leak detection.
Explains daisy chain functionality for connecting multiple PDUs under one IP address.
Details RNA for secure access on two separate networks with redundant power.
Steps to configure PDUs for RNA mode using CLI and connecting network cables.
Explanation of Power Share for monitoring and access with limited power feeds.
Information on serial number requirements for Power Share compatibility.
Diagram illustrating the connection for Power Share and Daisy Chain.
Instructions on how to enable the Power Share feature via the web interface.
Introduction to securing and controlling cabinet access with electronic handles.
Diagram showing connections for SmartZone Security Handles and sensors.
Steps to configure Rack Access Control via the web GUI.
Procedure for adding users and their access cards/PINs for cabinet entry.
Settings for Aisle Control, AutoLock Time, and Door Open Time.
Details on ACU name, work mode, firmware, hardware, and serial number.
Options for Card Only, Keypad Only, and Dual Authentication modes for handles.
Instructions for remotely opening and closing the cabinet handle.
Explanation of beacon LED colors and functions for status indication.
Customizing the status LED color for the handle's standby state.
Table listing supported card types for different SmartZone Security Handles.
Introduction to accessories designed to interoperate with the SmartZone G5 controller.
Lists available sensors like temperature, humidity, and door sensors with their counts.
Details on sensor ports, hubs, and extensions for connecting sensors.
Steps to configure temperature sensors to display in Celsius or Fahrenheit.
Guide to configure sensor locations, alarms, and details via the web interface.
Procedure for updating PDU firmware using the web interface.
Steps to update firmware using a USB drive.
Instructions for updating firmware using FTPs.
Overview of the G5 Upgrade Tool for firmware, configuration, and parameter management.
Instructions for using the reset button to recover from communication failure or reset to factory settings.
Categorized list of PDU alarms including unit, phase, breaker, outlet, and sensor alarms.
Reference for trap codes assigned to critical, warning, and informational alarms.
Using a specialized cable to connect to the PDU for CLI access.
Setting COM port parameters for logging into HyperTerminal.
Instructions for enabling SSH and logging in using PuTTY.
List of basic commands for PDU help and system information query.
Commands for managing system date, time, NTP, version, and reset.
Commands for managing network settings like SSH, FTPs, HTTP, MAC, and TCP/IP.
Commands for managing user accounts, listing users, and unlocking users.
Commands for managing daisy chain modes, locking cabinets, and outlet status.
Commands for querying device, phase, circuit breaker, and outlet electrical information.
Guide to configuring freeradius for user login with admin role.
Table listing available Panduit G5 accessories and their descriptions.
Details on constraints for JSON types, objects, numbers, strings, and arrays.
Specifies limitations for strings, numbers, arrays, and object depth in PDU API.
Lists supported URLs for GET, POST, and DELETE requests in the JSON API.
To Next Page
