INTELLIGENT PDU USER MANUAL
Power Share
Power Share is designed to allow for continual sensor monitoring and electronic rack
access if one of the 2 power feeds is lost. This feature is available for vertical (0U)
PDUs only. However, due to limited available power from the Panduit iPDU Controller,
power share was designed and tested under the following conditions:
ACF05 or AC06 SmartZone Security Handle, ACF10 (T+D), ACF11 (3T+D).
Care must be taken to not overload the system with accessories as this may cause
instability or power share to become unavailable. Additionally, power share is only
supported by Firmware version 3.x or higher on PDUs with a serial number:
COO: China S/N: > (greater than) CN213N6480
PDU’s manufactured in China after March 22
nd
, 2021
COO: India S/N: > (greater than) IN21536039
PDU’s manufactured in India after May 3
rd
, 2021
For complete details on the Serial number please use the Following Guide:
To Next Page
Loading...
Need help?
General
