Panduit smartzone G5 User Manual

SMARTZONE UPS USER MANUAL
136
Appendix H: Command Line Interface (CLI)
The Command Line Interface (CLI) is an alternate method used to manage and control
the PDU status and parameters, as well as basic admin functions. Through the CLI a
user can:
• Reset the PDU
• Display PDU and network properties
• Configure the PDU and network settings
• Switch outlets on/off
• View user information
Connecting to the CLI requires a terminal emulation program such as HyperTerminal or
PuTTY
Supported Commands
The PDU CLI command set for managing and monitoring the PDU includes the
following commands:
• ? command: PDU help query
• sys command: PDU system configure and setting
• net command: PDU net application configure and setting
• usr command: PDU user operation
• dev command: PDU device setting
• pwr command: PDU power setting
NOTE: Command variables are represented in command input syntax surrounded by
angle braces (< >). Optional parameters are represented in command input syntax
surrounded by straight brackets ([ ]). For data of type array, the 'x' character as index of
array in command input syntax means all indexes. You must be logged into the PDU
before commands can be sent. See below for a list of all CLI commands.

Panduit smartzone G5 Specifications

General

Brand	Panduit
Model	smartzone G5
Category	Power distribution unit
Language	English