NIITILAIZE
ODMESHIT =<>F:YSE
TDB ESRICVEODME
V–D1 1 1060 –NTV HA–B
1
5
10
15
16
1 5 10 15 20 25 30 35 40
If the [ENTER/SET] key is kept on pressing for 5 second when the status of this menu is <YES>,
shift to the DTB SERVICE mode screen. (Release from the SERVICE FACTORY mode.)
[4-3] DTB SERVICE MENU (+)
[4-4] WIDE XGA AUTO <=>
NIITILAIZE
UTAOADJST. =<>U:YSE
V–D1 1 1060 –NTV HA–B
1
5
10
15
16
1 5 10 15 20 25 30 35 40
• When the configuration is set to <NO> and the [ENTER/SET] key is pressed, no action is taken and the menu returns to
previous screen.
• When the configuration is set to <YES> and the [ENTER/SET] key is pressed for 5 seconds, the auto-adjustment
action executes.
[4-5] AUTO ADJUSTMENT (+)
Exclusively used for technical analysis (details omitted).
• Be sure to power off with the remote control unit or disconnect and connect the AC cable
after the auto-adjustment is completed.
• When replacing the IO Assy or MAIN Assy, the auto-adjustment is required.
To Next Page
Loading...
Need help?
General
