QSC touchmix-30 pro User Manual

97
1001108-01-F
P P
Supplies +48 VDC to XLR Inputs including Talkback.
1. Reset – Returns all settings to factory default
(all phantom power off).
2. Input Channel buttons – Touch
to enable or disable phantom power for the
channel.
3. Rear Panel View XLRs – Touch
to enable or disable phantom power for the
channel.
NOTE: Phantom power may also be
controlled from the Setup screen of each
inputchannel.
NOTE: It is good practice to turn off
phantom power when connecting or
disconnecting an input. “Hot patching” a
device can cause severe transients and
potentially damaging current surges.
Press
Mic 48V

QSC touchmix-30 pro Specifications

General

Type	Digital Mixer
Channels	32
USB Interface	Yes
Effects Processors	4
Wireless Control	Yes
Phantom Power	Yes
Outputs - Aux	6
EQ Bands	4-band parametric
Computer Connectivity	USB
A/D Resolution	24-bit
Sampling Rate	48kHz
Bit Depth	24-bit
Wireless Control Platforms	iOS, Android
Aux Outputs	6
Main Outputs	2
Touchscreen	Yes
Headphones	1
Effects	Reverb, Delay, Chorus
USB	2.0
Power Source	AC
Display	10-inch Touchscreen
Stereo Line Inputs	2 stereo pairs
Inputs - Line	2 stereo pairs