QSC touchmix-30 pro User Manual

83
1001108-01-F
R T W
The Room Tuning Wizard assists in adjusting output
equalization
1. Tuning Output – Displays the system and
friendly name of the output being tuned.
2. Restart – Go back and start over.
3. Clear Tuning EQ – Resets the GEQ, for
the currently selected output to the factory
default.
4. Select Output buttons – Touch the
output to betuned.
5. Select Measurement Method
– Each method progressively adds more
measurement spots to increase the accuracy of
the settings.
The Skip Measurement, Use Previous method
allows measurement data from the last tuning to
be used.
6. Next – moves the Wizard to the next step.
Follow the instructions on the subsequent
screens. (seebelow)
When finished, touch the “Navigate to GEQ” button. The
settings display on the output GEQ screen. An outline of
the fader knob indicates the tuning wizard settings.
The following illustrations show the procedure.
Home
Touch an
Output
Touch GEQ
Touch Tuning
Wizard
OR
Press
Wizard
Touch
Tuning
Wizard
2 3
1
6
5
4
Tuning Wizard
Aux 1
Wizard
MainOR GEQ
Tuning Wizard

QSC touchmix-30 pro Specifications

General

Type	Digital Mixer
Channels	32
USB Interface	Yes
Effects Processors	4
Wireless Control	Yes
Phantom Power	Yes
Outputs - Aux	6
EQ Bands	4-band parametric
Computer Connectivity	USB
A/D Resolution	24-bit
Sampling Rate	48kHz
Bit Depth	24-bit
Wireless Control Platforms	iOS, Android
Aux Outputs	6
Main Outputs	2
Touchscreen	Yes
Headphones	1
Effects	Reverb, Delay, Chorus
USB	2.0
Power Source	AC
Display	10-inch Touchscreen
Stereo Line Inputs	2 stereo pairs
Inputs - Line	2 stereo pairs