QSC touchmix-30 pro User Manual

112
1001108-01-F
Wireless Network Setup: Create New Network
IMPORTANT!: USB Wi-Fi adapter
(QSC Part # cp-000033-00)
Create New Network using a USB Wi-Fi
dongle provides short range wireless communication
between the TouchMix mixer and Android and/or iOS
devices with the TouchMix app installed.
1. Mixer Name: – Enter a name for the
network.
2. Network Type : – Set to Wireless .
3. Select Create New Network .
4. Set Network Password : – Enter a ten-
digit (numerical) password.
5. Apply – Touch to configure the network.
The network is ready for use. External devices
may now login to the mixer using the Mixer
Name and Password .
Press Menu
Touch
Network
Touch
Wireless
Main Mix
L/R
Joe’s Monitor
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
L
AF
∞
10
5
u
5
10
20
0
40
10
Main
Cue
Main
L/R
Mute
Default
Scene:
Network Setup
0123456789
My TM-30Mixer Name:
Network Type:
Wireless Network Settings
Apply
Wireless Wired
Connect to Existing Network Create New Network
Set Password:
Menu
Network Wireless
5
1 2
3
4

QSC touchmix-30 pro Specifications

General

Type	Digital Mixer
Channels	32
USB Interface	Yes
Effects Processors	4
Wireless Control	Yes
Phantom Power	Yes
Outputs - Aux	6
EQ Bands	4-band parametric
Computer Connectivity	USB
A/D Resolution	24-bit
Sampling Rate	48kHz
Bit Depth	24-bit
Wireless Control Platforms	iOS, Android
Aux Outputs	6
Main Outputs	2
Touchscreen	Yes
Headphones	1
Effects	Reverb, Delay, Chorus
USB	2.0
Power Source	AC
Display	10-inch Touchscreen
Stereo Line Inputs	2 stereo pairs
Inputs - Line	2 stereo pairs