Quantum DXi4700 User Manual

Chapter 9: Configuration
VTL Configuration
Quantum DXi4700 User’s Guide 206
Enable SMB Server signing - (Disabled by default) SMB server signing improves security on
Windows networks by requiring clients to provide a security signature to connect to a server. If the DXi
is joined to a Windows domain that is configured to require signing, you should enable SMB server
signing.
2. Click Apply.
VTL Configuration
The VTL page allows you to configure the DXi4700 to present its storage capacity as VTL (virtual tape
library) partitions that are compatible with standard backup applications. You can add virtual tape drives and
storage slots to VTL partitions, as well as create and work with virtual tape cartridges. You can also map
partitions to hosts.
Best Practices Guides
The following DXi Best Practices Guides are available at www.quantum.com/DXi4700BPG:
l Backup Exec from Veritas
l Data Protector from HP
l Data Protection Manager from Microsoft
l NetBackup from Veritas
l NetWorker from EMC
l Simpana from CommVault
l Tivoli Storage Manager from IBM
l Veeam Backup and Replication
To access the VTL page, click the Configuration menu, and then click the VTL tab.
The VTL page contains the following tabs:
l Partitions below
l Media on page 215
l Remote Host Access on page 223
Partitions
The Partitions page allows you to manage VTL partitions on the DXi4700. Use partitions to allocate the
DXi4700 virtual tape drives and storage elements to separate partitions that can be accessed by different
host systems.

Quantum DXi4700 Specifications

General

Brand	Quantum
Model	DXi4700
Category	Storage
Language	English