Quantum DXi4700 User Manual

Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide 280
Figure 174: On Demand Page
Tasks
Use the On Demand page to perform the following tasks:
Manually send a status data or configuration data report (see Sending a Report below).
View a configuration data report (see Viewing Configuration Data below).
Sending a Report
To manually send a status data or configuration data report:
1. Under Email Type, select the type of report to send (Status data or Configuration data).
2. In the Send To box, enter the e-mail address of the recipient.
3. Click Send.
Viewing Configuration Data
To view a configuration data report:
1. Under Email Type, select Configuration data.
2. Click View.
The System Configuration Report window displays.
3. (Optional) Click Save to save a local copy of the report in TXT format.
SNMP
The SNMP page allows you to configure the DXi4700 to send status messages using SNMP (Simple
Network Management Protocol). The DXi4700 supports SNMP v1 and v2c.
SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network, or
communities. SNMP compliant devices, called agents, store data about themselves in Management
Information Bases (MIBs) and return this data to the SNMP requesters.
You can configure the DXi4700 to act as an agent and send traps to a specified destination. You can also
add SNMP community information.

Quantum DXi4700 Specifications

General

Brand	Quantum
Model	DXi4700
Category	Storage
Language	English