Paper and Other Media
30
1
Switching between Paper Trays
When paper of the same size is load-
ed in both the standard tray and the
paper feed unit (option), paper will be
fed from the standard tray when you
start printing. To print on paper load-
ed in the paper feed unit, switch the
tray to be used to the paper feed unit
using [Tray Priority] in the [Paper Input]
menu.
A Press the {Menu} key.
The [Menu] screen appears on the
display.
B Press the {U} or {T} key to dis-
play [Paper Input], and then press
the {# Enter} key .
The paper selection menu appears.
C Press the {U} or {T} key to dis-
play [Tray Priority], and then press
the {# Enter} key.
The paper tray selection menu ap-
pears.
D Press the {U} or {T} key to select
the tray type you want to use, and
then press the {# Enter} key.
The following message appears on
the display:
E Press the {Online} key.
The initial screen appears.
Menu:
Paper Input
AGN200S
Tray Priority:
*Tray 2
KirP4GB_Mainte-F5_FM_forPaper.book Page 30 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
Need help?
General