Preparing for Printing
28
F Click [Local printer], and then click [Next >].
G Click [Add Port...].
H Click [SmartDeviceMonitor], and then click [Next >].
I Click [NetBEUI], and then click [Search].
A list of printers using NetBEUI appears.
J Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click [Specify address], and then enter the NetBEUI ad-
dress. The NetBEUI address can be checked with the configuration page. For
information about printing a configuration page, see p.131 “
Printing a Config-
uration Page”. The NetBEUI address appears in the format of “\\RN-
Pxxxx\xxx” on the configuration page. Enter the printer's network path in the
format of “%%Computer name\Share name”. Use“%%” instead of “\\” at the
beginning.
You cannot print using printers beyond routers.
K Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
L Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M Click [Next >].
N Specify whether or not to print a test page, and then click [Next >].
O Click [Finish].
The printer driver installation starts.
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows 2000 - IPP)
❒ Installing this printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
To Next Page
Loading...
Need help?
General