Replacing Consumables and Maintenance Kit
34
2
Replacing the Maintenance Kit
WARNING:
CAUTION:
The maintenance kit contains parts
for maintaining the printer.
Replace the maintenance kit if the fol-
lowing message appears on the dis-
play:
Before Replacing
Replace all the parts included in
Maintenance Kit at the same time. Re-
place them according to the following
procedure.
A Turn off the power, and then un-
plug the power cable.
Important
❒ Wait at least an hour after pow-
er off to allow internal parts to
cool down before replacing the
Maintenance Kit.
B Check the box contains the fol-
lowing items:
•Friction Pad × 3
See p.35 “Replacing the Friction
Pad”.
• Transfer Roller (with gloves)
See p.37 “Replacing the Trans-
fer Roller”.
• Paper Feed Roller × 3
See p.39 “Replacing the Paper
Feed Rollers”.
• Fusing Unit
See p.41 “Replacing the Fusing
Unit”.
• Do not risk electric shock by
handling the power cord or
plug with wet hands.
• The inside of this printer be-
comes very hot. Do not touch
parts labelled “v” (indicating a
hot surface). Touching these
parts will result in burns.
• Grip the plug, not the cord, when
pulling the plug from the socket.
Pulling the cord causes wear
and tear that can result in fire or
electric shock.
• Wait at least one hour after pow-
er off before replacing parts. Not
allowing the printer to cool may
result in burns.
Replace
Maintenance Kit
KirP4GB_Mainte-F5_FM_forPaper.book Page 34 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
Need help?
General