Available Options
31
3
Installing Options
Install options in the positions shown in the illustration.
❖ Exterior
1. Paper Feed Unit Type 610
(Tray 2 or Tray 3)
You can load up to 500 sheets (60-105
g/m
2
, 16-28 lb.) of plain paper into the
tray.
See p.33 “Attaching Paper Feed Unit
Type 610”.
Note
❒ A maximum two paper feed units
Type 610 can be attached.
❒ Top-most optional paper feed unit
is displayed “Tray 2” and bottom-
most is displayed “Tray 3” on the
display.
2. Envelope Feeder Type 610
You can load up to 60 envelopes (72-
90 g/m
2
, 19-24 lb.) into the tray.
See p.35 “Attaching Envelope Feeder
Type 610”.
Note
❒ The envelope feeder is a tray that
slides into the optional paper feed
unit. Without the optional paper
feed unit, the envelope feeder can-
not be used.
❒ Your Printer can have two optional
paper feed units installed at the
same time. The envelope feeder
unit can be used in either “Tray 2”
or “Tray 3”.
3. Duplex Unit AD610 (duplex unit)
You can print on both sides of paper.
Install the duplex unit by removing
the rear cover of the printer.
See p.54 “Attaching Duplex Unit
AD610”.
ZKGH150E
KirP4GB_Setup-F4_FM_forPaper.book Page 31 Wednesday, December 8, 2004 6:05 AM
To Next Page
Loading...
Need help?
General