Preparing for Printing
35
Only printers that respond to a broadcast from the computer are displayed. To
use a printer not listed here, click [Specify address], and then enter the Net-
BEUI address. The NetBEUI address can be checked with the configuration
page. For information about printing a configuration page, see p.131 “
Printing
a Configuration Page”. The NetBEUI address appears in the format of “\\RN-
Pxxxx\xxx” on the configuration page. Enter the printer's network path in the
format of “%%Computer name\Share name”. Use “%%” instead of “\\” at the
beginning.
You cannot print using printers beyond routers.
J Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
K Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
L Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
M Restart the computer to complete installation.
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows NT 4.0 - IPP)
❒ Installing this printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D Click [PostScript 3 Printer Driver].
To Next Page
Loading...
Need help?
General