IEEE 1394 Connection
61
4
IEEE 1394 Connection
Important
❒ Use the 1394 interface cable provided with the 1394 interface unit.
❒ You cannot plug devices together to create loops.
❒ Do not use a cable more than 4.5 meters (14.8 feet) long.
A Connect the interface cable to the 1394 interface unit.
B Connect the other end to the host computer.
Note
❒ You can use either connector.
❒ Either of the two connectors for the 1394 interface unit can be used.
❒ If you have an interface cable with a ferrite core, connect the ferrite core
end to the printer.
Reference
For details about settings for parallel connection printing, see Software
Guide.
ZKGX550E
KirP4GB_Setup-F4_FM_forPaper.book Page 61 Wednesday, December 8, 2004 6:05 AM
To Next Page
Loading...
Need help?
General