Monitoring and Configuring the Printer
190
You can configure the Ethernet interface, IEEE 1394 interface, or IEEE 802.11b
interface.
❖ View settings
The following command displays the current domain name:
msh> domainname
❖ Interface domain configuration
msh> domainname “interface_name”
❖ Setting the Domain Name
msh> domainname “interface_name” name “domain name”
• A domain name can be entered using up to 63 alphanumeric characters.
• The Ethernet interface and IEEE 802.11b interface will have the same do-
main name.
• ip1394 can be specified only when the IEEE 1394 interface is installed.
• wlan can be specified only when the IEEE 802.11b interface is installed.
❖ Deleting the Domain Name
msh> domainname “interface_name” clear name
help
Use the “help” command to display the available command list and the proce-
dures for using those commands.
❖ Command list display
msh> help
❖ Display of procedure for using commands
msh> help “command_name”
hostname
Use the “hostname” command to change the printer name.
❖ View settings
msh> hostname
Interface Interface set
ether Ethernet interface
ip1394 IEEE 1394 interface
wlan IEEE 802.11b interface
To Next Page
Loading...
Need help?
General