Monitoring and Configuring the Printer
218
❒ For details about UNIX commands, see UNIX Supplement.
❒ Check the error contents that may be printed in the configuration page. For
details about printing a configuration page, see p.131 “
Printing a Configura-
tion Page”.
Printer configuration
You can check the printer configuration using telnet.
Replace Develop. Unit (Color) It is time to replace the development unit (col-
or).
Replace Develop. Unit (Cyan) It is time to replace the development unit (cy-
an).
Replace Develop. Unit (Magenta) It is time to replace the development unit (ma-
genta).
Replace Develop. Unit (Yellow) It is exchange time of the development unit
(yellow).
Replace Fusing Unit It is time to replace the fusing unit.
Replace Maintenance Kit It is time to replace the maintenance kit.
Replace PCU It is time to replace the photoconductor unit.
Replace Transfer Belt It is time to replace the transfer belt.
SD Card Authentication failed SD card authentication failed.
Setting Remotely The RDS setting is being processed.
Skipped due to Error Skipped the error.
Storage Complete The storage is complete.
Storage Failed The storage has failed.
Supplies Order Call failed The supply order call has failed.
Suspend / Resume Key Error Finisher stop button was pressed.
Transmission Aborted The transmission was interrupted.
Transmission Complete The transmission completion was completed.
Transmission Failed The transmission has failed.
Tray Error: Chaptering The paper feed tray specification error has oc-
curred because chaptering as well as the nor-
mal paper use the same tray for printing.
Tray Error: Duplex Printing Selected paper tray cannot be used for duplex
printing.
Unit Left Open: ADF Document feeder is opened.
Warming Up... The machine is warming up.
Messages Description
To Next Page
Loading...
Need help?
General