Setting Up
28
2
Test Printing
The following explains the procedure
for test printing of the configuration
page.
Test print in order to verify that the
printer is working normally. Test
printing checks printer performance
only; it does not test the connection to
the computer.
A Press the {Menu} key.
The [Menu] screen appears on the
display.
B Press the {U} or {T} key to dis-
play [List/Test Print], and then press
the {# Enter} key.
The menu for selecting the con-
tents to be test printed appears.
C Press the {U} or {T} key to dis-
play [Config. Page], and then press
the {# Enter} key.
The following message appears
and the configuration page is
printed.
Note
❒ If printing is not normal, check
to see if an error message ap-
pears on the display. If there is
an error message, see “Trouble-
shooting”, Maintenance Guide.
D Check the options.
Note
❒ For details about the configura-
tion page, see “Interpreting the
Configuration Page”, Software
Guide.
E Press the {Online} key.
The initial screen appears.
Menu:
List/Test Print
List/Test Print
Config. Page
AGN200S
Printing...
Ready
AGN202S
KirP4GB_Setup-F4_FM_forPaper.book Page 28 Wednesday, December 8, 2004 6:05 AM
To Next Page
Loading...
Need help?
General