Sending a Fax
This section describes the transmission modes and the basic operations for sending a fax.
• It is recommended that you call the receiver and confirm with them when sending important
documents.
Selecting Transmission Mode
This section describes how to select the transmission mode.
There are two transmission modes: Memory Transmission and Immediate Transmission.
Memory Transmission
In this mode, the machine scans several originals into memory and sends them all at once. This is
convenient when you are in a hurry and want to take the document away from the machine. In this
mode, you can send a fax to multiple destinations.
Select this mode when scanning 2-sides of original and send them using the ARDF with the Type 2
model.
Immediate Transmission
In this mode, the machine scans the original and faxes it simultaneously, without storing it in
memory. This is convenient when you want to send an original quickly. In this mode, you can only
specify one destination.
Note that if the machine is in this mode, only one side of the original is scanned using the ARDF
regardless of the ARDF original setting for the Type 2 model.
1. Press the [Facsimile] key, and then press the [
][ ] keys.
Alternatively, you can press the [Shortcut to Func.] key if [Shortcut to Function] under administrator
settings is set to [Fax Immediate TX].
2. Press the [ ][ ] keys to select [Immediate TX], and then press the [OK] key.
Sending a Fax
209
To Next Page
Loading...
Need help?
General
