2. Press the [ ] [ ] keys to select [Network Settings], and then press the [OK] key.
3. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
4. Press the [ ][ ] keys to select [Ethernet], and then press the [OK] key.
5. Press the [ ][ ] keys to select [Set Ethernet Speed], and then press the [OK] key.
6. Press the [ ][ ] keys to select the Ethernet speed, and then press the [OK] key.
7. Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• For details about [Admin. Tools Lock], see p.298 "Administrator Settings".
Configuring Telephone Network Settings
Selecting the telephone line type
Select the telephone line type according to your telephone line service. There are two types: tone and
pulse dial.
This function is not available in some regions.
2. Getting Started
76
To Next Page
Loading...
Need help?
General
