Resetting the Machine’s Settings
Click the [Reset Settings] tab on the administrator settings page to reset the machine's settings.
Reset Settings
Item Description
Reset Network Settings Select to restore the following settings to their defaults:
• Settings under [Network Settings]
• Settings under [LDAP Server]
• Settings under the [Administrator] tab of [Administrator Tools]
Reset Menu Settings Select to restore the settings other than the following to their defaults:
• Network settings
• Scan destinations
• User restriction settings
• Fax destinations and Special Sender list
• IPsec settings
• [Printer Registration], [Low Humidity Mode], and [Image Density]
settings under system settings of the control panel setting menu
Clear Scan Destination Select to clear the scan destinations.
Reset Settings of
Available Functions
Select to clear the user restriction settings and counter information for each
user.
Clear Address Book Select to clear the fax destinations and Special Sender list.
Reset IPsec Settings Select to clear the IPsec settings.
• [Reset IPsec Settings] appears only when the administrator password is specified.
8. Configuring the Machine Using Web Image Monitor
354
To Next Page
Loading...
Need help?
General
