Siemens LMS14 User Manual

354/617
Building Technologies Division User Manual LMS14… CC1U7471en
6 The settings in detail 28.01.2015
6.21.4 Keep hot function
Line no. Operating line
5460 Setpoint keep hot
Temperature setpoint of the Keep hot function.
Line no. Operating line
5461 Readj setp keep hot 40°C
Correction value for the setpoint on the 2-position controller with a keep-hot setpoint of
40 °C.
Line no. Operating line
5462 Readj setp keep hot 60°C
Correction value for the setpoint on the 2-position controller with a keep-hot setpoint of
60 °C.
Line no. Operating line
5464 Keep hot release
24h/day
DHW release
Time program 3/HC3
Time program 4/DHW
Time program 5
Release of Keep hot function.
Line no. Operating line
5468 Min cons time for keep hot
Here, set the minimum consumption time activating the Keep hot function.
Line no. Operating line
5470 Keep hot time wo heating
Duration of Keep hot function when there is no request for space heating.
Line no. Operating line
5471 Keep hot time with heating
Duration of Keep hot function when, at the same time, there is a request for space
heating.
Line no. Operating line
5472 Pump overrun time keep hot
Here, set the period of time (in minutes) the pump still runs on burner shutdown during
the Keep hot function.
Setpoint keep hot
Readj setp
keep hot 40°C
Readj setp
keep hot 60°C
Keep hot release
Min cons time for keep hot
Keep hot time wo heating
Keep hot time with heating
Pump overrun time keep
hot (in minutes)

Siemens LMS14 Specifications

General

Brand	Siemens
Model	LMS14
Category	Control Unit
Language	English