Download CPU / drive unit to target device
The
configuration is only loaded to the device selected in the project tree which means
that the function needs to be performed separately for each D410-2 and SINAMICS
Integrated.
Load CPU / drive unit to PG
The unit's configuration is only loaded to the PG selected in the project tree which
means that the function needs to be performed separately for each D410-2 and SI‐
NAMICS Integrated.
Copy RAM to ROM
Copying
from RAM to ROM is only performed for the device selected in the project tree
which means that the function needs to be performed separately for each D410-2 and
SINAMICS Integrated.
Note
Tips for going online:
In
online operation, SIMOTION SCOUT attempts to conduct online operation with all hardware
components contained in the project. This means that the time needed for going online
increases.
We recommend that you make settings for SIMOTION SCOUT so that online operation is
made only with those components currently needed. The setting can be found at "Target
system" > "Select target devices ..." in the menu. The selection and deselection of the devices
in the online state can be made via the "Connect target device" context menu on the device.
This procedure is also advantageous when the configuration of the drive unit is completed.
Without going completely offline, the connection can be simply deselected via the context menu
on the drive unit.
Commissioning (software)
7.1 Overview of commissioning
SIMOTION D410-2
144 Commissioning and Hardware Installation Manual, 01/2015
To Next Page
Loading...
Need help?
General
