B.2 Device-specific information
Note regarding SIMOTION D
Note
The
product standard EN 61800-3 describes the EMC requirements placed on "Variable-speed
drive systems". As such, it defines different limits depending on the location of the drive system.
SINAMICS S120 power units are designed for use in the second environment. The term second
environment refers to all locations outside residential areas. These are basically industrial
areas which are supplied from the medium-voltage line supply via their own transformers.
It is essential to follow the installation instructions in the SINAMICS S120 Manuals in order to
ensure compliance with emitted interference and immunity values.
The same installation instructions apply for the SIMOTION D410-2 control unit as for the
SINAMICS S120 CU310-2 control unit with regard to EMC.
For more information on this topic also refer to Catalog PM21 as well as the SINAMICS
Function Manuals.
Standards and approvals
B.2 Device-specific information
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015 325
To Next Page
Loading...
Need help?
General
