Description: User-oriented G group for position display (ext. language)
313 FG_GROUP4 - -
- User-oriented G group for position display (external language) BOOLEAN Immediately
-
- 0 9 1 1000 7/3 U
Description: User-oriented G group for position display (ext. language)
314 FG_GROUP5 - -
- User-oriented G group for position display (external language) BOOLEAN Immediately
-
- 0 19 1 1000 7/3 U
Description: User-oriented G group for position display (ext. language)
330 CMM_POS_COORDINATE_SYSTEM - -
- Coordinate position of the machine axis BYTE Immediately
-
- 0 0 0 7 7/3 U
Description: Coordinate position of the machine
331 CONTOUR_MASK - -
- Enable 802 contour definition programming BYTE Immediately
-
- 0 1 0 1 3/3 U
Description: Enable 802 contour definition programming
332 TOOL_LIST_PLACE_NO - -
- Enable the location number in the tool list BOOLEAN Immediately
-
- 0 0 0 1 3/3 U
Description: Enable the location number in the tool list
360 SPINDLE_LOAD_DISPL1 - -
- Switch on spindle 1 utilization display BOOLEAN Immediately
-
- - 0 0 1 3/3 U
Description: Switch on spindle 1 utilization display
361 USER_MEAS_TOOL_CHANGE - -
- Input enable for T/D no. in tool measuring window BYTE Immediately
-
- - 0 0 1 3/3 U
Description: 0: Input of T/D no. disabled
1: Input of T/D no. enabled
362 SPINDLE_LOAD_DISPL2 - -
- Switch on spindle 2 utilization display BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Machine data
3.1 Display machine data
Parameter Manual
List Manual, 01/2017 29
To Next Page
Loading...
Need help?
General
