Energy Metered Values
Energy Metered Values
Energy metered values no longer need to be created by the user separately. They are available as active and
reactive power for reference and delivery direction in each Voltage/current 3-phase function group. The
calculation is based on the current and voltage transformers associated with the protected object.
Additional Data Types
The following data types are also used in the system, but they are not contained in the information catalog for
general use:
•
ENC (Enumerated Setting Controllable)
The data type ENC models a command with which the user can set predefined values.
•
SEQ (Sequence)
External Signals
User-defined signals of different types (see Figure 3-38) are available for GOOSE Later Binding. After instantia-
tion in a logical node, an external reference is generated during IID export and provided to a IEC 61850 system
tool (for example, System Configurator) for GOOSE Later Binding (according to the Later-Binding procedure
specified in IEC 61850-6).
[sc_LB_extsign, 1, en_US]
Figure 3-38
External Signals
NOTE
Consider the chapter on GOOSE Later Binding in the DIGSI Online Help. User-defined signals exist as
external signals and as preconfigured inputs that have been activated via the GOOSE column.
3.5.3
3.5.4
3.5.5
System Functions
3.5 User-Defined Objects
SIPROTEC 5, Fault Recorder, Manual 91
C53000-G5040-C018-5, Edition 11.2017
To Next Page
Loading...
Need help?
General
