ENGINE COOLING 6B-5
ANTI-FREEZE PROPOR-
TIONING CHART
COOLANT CAPACITY
G13 engine G10 engine
MAINTENANCE
COOLANT
The coolant recovery system is standard. The coolant in the radiator expands with heat, and the overflow is col-
lected in the reservoir tank.
When the system cools down, the coolant is drawn back into the radiator.
The cooling system has been filled at the factory with a quality coolant that is either 50/50 mixture of water and
GOLDEN CRUISER 1200 (ethylene glycol antifreeze.) or 30/70 mixture of water and GOLDEN CRUISER 1200.
The 50/50 mixture coolant solution provides freezing protection to –36_C (–33_F), the 30/70 mixture coolant solu-
tion provides freezing protection to –16_C (3_F).
When changing the engine coolant, use mixture of 50% water and 50% GOLDEN CRUISER 1200 for the market
where ambient temperature falls lower than –16_C (3_F) in winter and mixture of 70% water and 30% GOLDEN
CRUISER 1200 for the market where ambient temperature doesn’t fall lower than –16_C (3_F).
NOTE:
D Alcohol or methanol base coolant or plain water alone should not be used in cooling system at any time
as damage to cooling system could occur.
D Even in a market where no freezing temperature is anticipated, mixture of 70% water and 30% ethylene
glycol antifreeze (Antifreeze/Anticorrosion coolant) should be used for the purpose of corrosion protec-
tion and lubrication.
ANTI-FREEZE PROPORTIONING TABLE
Vehicle with M/T Vehicle with A/T
Imp pt.
2.43/5.67 4.05/4.05 2.48/5.79 4.13/4.13
Engine radiator and heater
3.3 liters
(7.0/5.8 US/Imp pt.)
3.4 liters
(7.2/6.0 US/Imp pt.)
Reservoir tank
0.6 liters
(1.3/1.1 US/Imp pt.)
Total
3.9 liters
(8.2/6.9 US/Imp pt.)
4.0 liters
(8.5/7.0 US/Imp pt.)
Engine radiator and heater
4.0 liters
(8.5/7.0 US/Imp pt.)
4.1 liters
(8.6/7.2 US/Imp pt.)
Reservoir tank
0.6 liters
(1.3/1.1 US/Imp pt.)
Total
4.6 liters
(9.7/8.1 US/Imp pt.)
4.7 liters
(9.9/8.3 US/Imp pt.)